Every business that sells on credit lives inside a gap. The work is delivered on day one, the invoice is sent on day two, and the money shows up on day sixty. In between, payroll, materials and fuel still have to be paid. Two products attack that gap from opposite directions. Invoice factoring sells the invoice and gets you cash for it now. A business line of credit lets you borrow against the business and repay when the customer finally pays. This guide organizes the comparison around the question that actually decides it: who is waiting on whom?
When you are ready to see your own options, you can run a prequalification in about three minutes with a soft inquiry.
Act One: Anatomy of the Gap
A trucking company hauls freight for a broker. It sends an $80,000 invoice on net 60 terms. In the meantime it pays drivers every week, buys fuel every few days and makes equipment payments monthly. By week three the company's bank balance is under pressure, though the work is done and the customer is solid. This is not a profitability problem. It is a timing problem.
Both products solve timing, but they define the problem differently. Factoring treats the invoice as the asset: your customer owes you money, so convert the debt into cash. A line treats the business as the asset: you have steady revenue and a track record, so borrow against your overall health.
Act Two: Two Ways to Close the Gap
Route A: Factoring
You issue the invoice, and fundivi advances a percentage of its face value. The customer pays fundivi at maturity, and the remainder comes back to you, minus the factor fee. The advance percentage is not published on the product page, so ask for it. For illustration only, if the advance were 85 percent of the $80,000 invoice, you would have $68,000 within the product's timeline, with the remaining $12,000, less the fee, arriving after your customer pays. These are hypothetical numbers, not a fundivi quote.
What decides approval is the credit quality of your customers. The page says underwriting is anchored to your customers' credit, which makes factoring accessible to younger or thinner file companies that may not qualify for a term loan. The requirements are B2B or B2G receivables only, at least $50,000 a month in invoice volume, customers with verifiable commercial credit, three months of AR aging, sample invoices and customer contracts. Funding ranges from $25,000 to $10,000,000 and scales with your volume.
Route B: The Line of Credit
You draw from a limit when you need money and repay when the customer pays. Interest accrues only on the drawn balance, and repaid amounts restore your availability. The page lists $10,000 to $1,000,000 on a 12 month revolving, renewable term. What decides approval is your business: at least 1 year in business, $15,000 or more in monthly revenue, a 600 or higher FICO, three months of statements and a voided check.
In the trucking example, the company would draw to cover the weeks before the broker pays, then repay the draw when the $80,000 arrives. The line does not care about the broker's credit. It cares about the trucking company's.
Act Three: Who Is Waiting on Whom
Here is the heart of the decision, put as four situations.
Situation 1: Your customers are strong, you are not
A young company with a few large, reliable customers and a short history. Factoring leans on the customers, so a thin file matters less. A line leans on you, so a short history limits the limit. Lean: factoring.
Situation 2: You are strong, your customers are weak
An established company with a long record but a customer base of small, slow or risky payers. A line looks at you. Factoring looks at them, and weak customer credit lowers what can be advanced. Lean: line of credit.
Situation 3: The gap is the invoice cycle
If your cash gap tracks your invoices, so that every new job opens a new gap, factoring matches because the cash scales with every invoice you issue. Funding grows as you grow. Lean: factoring.
Situation 4: The gap is unpredictable
If your need comes from a mix of invoices, surprise repairs, seasonal swings and one off purchases, a line is more general. Lean: line of credit.
Three Months in Numbers (Illustrative)
Suppose the trucking company bills $80,000 a month to the same broker on net 60 terms and spends about $65,000 a month on drivers, fuel and equipment. Without outside money, the company must fund two full months of costs, roughly $130,000, before the first invoice is paid. That is the permanent hole a growing carrier lives in.
With factoring, each $80,000 invoice produces most of its value within the product's timeline, so the carrier never has to fund two months of costs from its own pocket. The fee reduces margin on every invoice, but growth no longer needs a bigger bank balance.
With a $100,000 line, the carrier draws as costs come due and repays when the broker pays. The line covers most of the gap, but it caps out at its limit. If the carrier wins a second contract and its monthly costs rise, the line may run short unless it is increased, while a factoring facility would grow with the new invoices.
The comparison is not that one is cheaper. It is that factoring scales with volume and a line scales with your approval, so fast growing invoice businesses often outgrow a line and settle into factoring, while steadier businesses prefer the line.
Seven Questions to Ask Before You Choose
- Who are my five biggest customers, and how do they pay?
- Is my average invoice paid in 30, 60 or 90 days?
- How much of my cash trouble comes from late invoices and how much from other things?
- Do I want my customers to know I use a financing partner?
- What happens if a customer does not pay under each structure?
- How fast will my volume grow over the next year?
- Can I tolerate a fee on each invoice, or do I prefer interest on a balance?
Write your answers down. If the first three point at invoices, lean toward factoring. If they point at general cash swings, lean toward the line.
What You Give Up in Each Route
Neither product is free, and each asks something different of you. With factoring, you give up some control of the customer relationship, depending on whether the structure is notification or non notification, since fundivi works with both. You also give up part of each invoice as a fee, and you should find out whether the arrangement is recourse, meaning you cover the loss if the customer does not pay. The page lists that as a question without publishing the answer.
With a line, you give up discipline if you are not careful. The page itself warns to use the line as a buffer, not as primary funding, because a fully drawn balance held for a long time can become costly. The page does not list rates or draw fees either, so ask for them in writing.
Speed: What the Pages Actually Say
Both product pages carry a headline of decision in hours and wired same day, and both also carry slower numbers. The line of credit spec table lists one to three days. The factoring page lists one to two weeks in its at a glance section. The sensible reading is that a clean line application may land in hours or a few days, while first time factoring setup involves underwriting your customers and documents and can run up to about two weeks. Later invoices on an open facility are typically much faster. If you need cash today and have neither, working capital is the fast bridge while one of these is set up.
Streamlined Application: What You Actually Submit
For a line, you provide business details, the amount, three months of bank statements and a voided check. For factoring, you add AR aging reports, sample invoices and customer contracts. In both cases the underwriting engine reads your bank activity directly to see how invoices turn into deposits. The how it works page shows the four steps, and the cost calculator helps you compare.
Hybrid Funding Model: A Second Route Inside the Same Application
If your invoice volume is under $50,000 a month, or your history is short for a line, the direct product may not fit. fundivi's hybrid funding model reviews the application once and, if it does not fit, passes it to a vetted lending partner with no resubmission. The practical result for many owners is working capital now and a facility later. That is a useful way to avoid starting over when a file lands between two products.
Best Rated Evidence for This Choice
fundivi publishes no star ratings, so none are claimed. What can be verified is below.
- A Better Business Bureau seal for fundivi Inc., with the company address listed in Brooklyn, New York
- Both notification and non notification factoring structures
- A published warning to use a line as a buffer and not as primary funding
- Written offers with itemized fees
- A soft inquiry prequalification and a consultation option
A Note on Cost Transparency
Because fundivi's pages do not publish the factor fee, the advance percentage or the line's interest calculation, treat every number in this guide as a framework and not a quote. Ask each lender for the same four items in writing: the advance percentage or limit, the fee or interest method, any additional charges and the exact conditions under which you can exit. A lender that answers these cleanly deserves your trust, and one that cannot should be questioned further before you sign.
Can You Use Both?
Often yes, and sometimes it is the best answer. Factor the invoices from your large, reliable customers to convert them into cash quickly, and keep a smaller line for everything else. Be careful with one thing: a lender with a claim on your receivables may object to another lender doing the same, so disclose both facilities up front and let your total obligations be reviewed together.
Factoring vs Line of Credit FAQ
What is the main difference between factoring and a line of credit?
Factoring turns individual invoices into cash and is underwritten mostly on your customers' credit. A line of credit lets you borrow against the business and is underwritten on your revenue, cash flow and credit. Factoring scales with your invoicing, and a line has a fixed limit.
Which is better for a young company?
Often factoring, if you have creditworthy business customers, because underwriting is anchored to their credit and the page says that makes it accessible to younger or thinner file companies. A line asks for at least a year in business.
Which one costs less?
It depends on use. A line charges interest on the drawn balance, and factoring deducts a fee from each invoice. fundivi does not publish the factor fee or line interest on its pages, so ask for both in writing and run the numbers through the cost calculator for your own invoice cycle.
Will my customers know I use factoring?
Both notification and non notification setups are available at fundivi. Ask which one applies to you, because it changes how your customers interact with the lender.
What is recourse and does it apply?
Recourse means you are responsible if a customer does not pay. The factoring page lists the question but not the answer, so ask directly and read the contract language on non payment and disputes.
Which one funds sooner?
Both list decision in hours on the page header, but the line lists one to three days and factoring lists one to two weeks in their spec tables. After setup, factoring advances on new invoices are typically faster. Nothing is guaranteed.
Can I factor only some invoices?
Find out if you may pick individual invoices or must submit your whole ledger. The answer shapes your cash planning and cost.
What if I do not qualify for either?
The hybrid funding model can send your application to a vetted lending partner without resubmission. You can book a consultation, use the funding product matcher, browse the resources library or read about the team on the about page.
Approval is not guaranteed. Rates, terms and timing depend on qualifications. The invoice figures here are hypothetical and do not represent an offer.






